Audi’s A4 is an entry-degree sport sedan constructed to compete with different German automakers corresponding to BMW and Mercedes. The inside options of the A4 embrace a stereo system that’s extra generally present in luxurious fashions. Audi homeowners who want to swap their factory unit stereo decks for aftermarket stereo units have loads of choices from which to decide on. After you have chosen the unit that can change your inventory stereo, you possibly can have an expert set up it or do it your self.
Audi A4 Aftermarket Stereo Units Installation Instructions
1. Pull the discharge deal with beneath the dashboard on the driving force’s aspect of the Audi. Transfer to the front of the automotive and carry the hood. Flip the bolt on the negative battery cable’s clamp two full rotations with the 10mm wrench. Elevate the cable from the battery and transfer it to the aspect. Return to the A4′s cabin.
2. Insert the 4 stereo elimination keys into the slots close to the corners of the stereo deck. The keys can be found by way of Audi or Volkswagen sellers, in addition to by way of aftermarket automobile audio shops.
3. Place two fingers from every hand contained in the rings on the ends of the keys. Pull out on the instruments to have interaction the discharge mechanisms on the perimeters of the inventory radio whereas pulling the unit from the dashboard.
4. Pull the stereo wiring connectors by the plastic wire binders till they disconnect from the shops on the again of the Audi’s head unit. Take away the antenna cable lead from the outlet on the factory unit radio’s rear panel.
5. Slide the set up cage into the A4′s stereo mounting dock. Push the steel sleeve into the dashboard till the front edge is stage with the face of the dashboard. Fold the steel tabs on the corners of the cage with the flat screwdriver to safe it into the dock.
6. Collect the stereo wiring and antenna cables from contained in the stereo dock. Pull the cables to the front of the set up cage. Plug the stereo wiring leads into the wiring harness adapter. See the adapter’s handbook for proper connection areas.
7. Join the wiring harness adapter lead connectors to the retailers on the rear panel of the aftermarket stereo deck. The wiring harness leads can solely hook up with the stereo unit a technique. Insert the antenna cable lead into the stereo’s antenna enter.
8. Push the stereo unit into the set up cage till it locks into place inside the Audi’s stereo dock. Return to the engine compartment.
9. Substitute the negative battery cable clamp onto the A4′s negative battery terminal. Tighten the bolt on the finish of the clamp with the wrench and shut the Audi’s hood.
Read more : How to Install an A4 Stereo
